Mobile van jumpstart · Hybrid 12V auxiliary battery
Hybrid or EV dead in Walmley with a full traction battery? The 12V auxiliary is the usual culprit. Safe on-site testing and van jumpstart.

The safe boundary matters here. Everything we do is on the 12V side; the orange high-voltage system is left strictly alone.
Van won't turn over in Walmley? Nine times out of ten it isn't the starter — it's a tired leisure or main battery that can't hold cranking amps on a cold morning. We come out with a heavy-duty booster rated for diesel commercials.
Diesel vans need real cranking amps — a jump pack designed for cars won't spin a 2.0 or 2.2 diesel that's been standing cold. Our kit is spec'd for commercials.
Hybrids and EVs are increasingly common on 1970s detached houses around Walmley, and 12V auxiliary failures now make up a growing share of our callouts.
Locally that means the streets between Walmley and Sutton Coldfield, with access via A38 Bassetts Pole and A5127 and a practical radius reaching Sutton Coldfield (~2 mi) and Erdington (~3 mi).
Hybrid and EV owners across Walmley whose car will not go to "ready".
Domestically, 1970s detached houses and modern estates dominate around here, which shapes how these jobs are accessed and worked.
Recent job nearby: a hybrid in Walmley completely unresponsive with a full traction battery. 12V auxiliary read 7.4V — replaced with an AGM unit, ready state confirmed on-site.
Recent job nearby: an EV near A38 Bassetts Pole that had been declared "needs recovery" by another provider. Powered up on the manufacturer jump points in under five minutes.
Yes. Walmley is inside our routine coverage from Oldbury via A38 Bassetts Pole, roughly 2 miles from Sutton Coldfield. We cover it alongside Sutton Coldfield and the surrounding streets.
That's parasitic drain — usually a dashcam, tracker or aftermarket electrics wired to permanent live. We do a milliamp draw test and identify the circuit.
On Sprinters, Crafters, T6 Transporters and newer Custom Transits — yes. We carry the OBD tool and code it as part of the fit.
Because the 12V battery powers the computers that close the high-voltage contactors. Without it, the traction battery cannot be connected to anything.
Yes, at the designated 12V jump points, which are what we use. The high-voltage system is not involved and should never be touched roadside.
A DC-DC converter maintains it while the car is in ready mode. Short use and long standing still let it sink, exactly as with a conventional car.
Van make, model, engine size and symptom — we already know if it's a battery, alternator or starter pattern.
Price agreed before we set off. Includes callout, jumpstart and full electrical health check.
Voltage, load, alternator output at 2000 rpm, parasitic draw. Real numbers, not guesses.
Jumpstart plus recharge advice if the battery is recoverable, or fit and code a new AGM/EFB on the spot.
We use manufacturer jump points and fit correctly vented AGM auxiliaries. Usually resolved in one visit. Tell us the vehicle and the symptom and you will get a firm price before anyone sets off.
Walmley sits about 2 miles from Sutton Coldfield, and the same van covers Sutton Coldfield (~2 mi), Erdington (~3 mi) and Boldmere (~1 mi) on the same run.
An electric car stopped by a lead-acid battery is a strange idea until it happens to you. In Walmley it is now one of the most common calls we take, and one of the quickest to fix. That is the whole job: diagnose it properly, fix it once, and explain what caused it.
Call now or send a WhatsApp — we'll confirm your quote and dispatch the nearest engineer.