Mobile battery replacement · Hybrid 12V auxiliary battery
Cannock hybrid and EV 12V auxiliary battery support. We never touch high-voltage systems — the 12V side is where the fault almost always is.
The safe boundary matters here. Everything we do is on the 12V side; the orange high-voltage system is left strictly alone.
Mobile battery replacement across Cannock and the WS11/WS12 area, with the correct AGM, EFB or standard flooded chemistry fitted the first time — not whatever's on the shelf.
The wrong battery in a stop-start car will show a warning light within days and drain itself trying to charge to spec. We fit the OEM chemistry every time.
Recent job nearby: a hybrid in Cannock completely unresponsive with a full traction battery. 12V auxiliary read 7.4V — replaced with an AGM unit, ready state confirmed on-site.
Recent job nearby: an EV near M6 Toll T7 that had been declared "needs recovery" by another provider. Powered up on the manufacturer jump points in under five minutes.
Hybrids and EVs are increasingly common on ex-mining terraces around Cannock, and 12V auxiliary failures now make up a growing share of our callouts.
Locally that means Cannock itself plus the neighbourhoods that feed into it, with access via M6 Toll T7 and A5 and a practical radius reaching Hednesford (~2 mi) and Norton Canes (~3 mi).
AGM is a fully sealed absorbed-glass-mat battery for premium and stop-start; EFB is an enhanced flooded battery for entry-level stop-start. Fitting the wrong one is a warranty-void job.
Because the 12V battery powers the computers that close the high-voltage contactors. Without it, the traction battery cannot be connected to anything.
Yes, at the designated 12V jump points, which are what we use. The high-voltage system is not involved and should never be touched roadside.
A DC-DC converter maintains it while the car is in ready mode. Short use and long standing still let it sink, exactly as with a conventional car.
Yes. Cannock is inside our routine coverage from Oldbury via M6 Toll T7, roughly 9 miles from Wolverhampton. We also cover the surrounding neighbourhoods on the same run.
No — we use a 12V memory saver on the OBD port during the swap, so all adaptations and settings are preserved.
Once powered, the vehicle's ready state is confirmed and DC-DC converter output is checked to be maintaining the 12V system.
By reg on the phone — we confirm the exact OEM battery spec before quoting.
Battery, fitting, coding, recycling, warranty — one number on the phone.
Memory saver in, old battery out, new one in and terminals torqued to spec.
Cannock sits about 9 miles from Wolverhampton, and the same van covers Hednesford (~2 mi), Norton Canes (~3 mi) and Bridgtown (~1 mi) on the same run.
That is the 12V auxiliary. On-site testing and replacement across Cannock, without touching the high-voltage system. Tell us the vehicle and the symptom and you will get a firm price before anyone sets off.
The 12V auxiliary is the weak link in hybrids and EVs. Test it, replace it with the right AGM unit, and the car comes back to life without recovery. That is the whole job: diagnose it properly, fix it once, and explain what caused it.
Call now or send a WhatsApp — we'll confirm your quote and dispatch the nearest engineer.